Digital Clamp Meter

An instrument designed for use in laboratories, field services, home use, and in any circumstances where measurement of a high current is required.


ltem No.


This instrument complies with IEC/EN 61010-1, Category IV 600V and is CE certified. 

As determined by safety standard NR-10, always use personal protective equipment.

Accuracy is given as ±(% of reading + number of least significant digits) for 23°C ±5°C and relative humidity up to 75%. 

Specification valid for 10% to 100% of the measurement range.

Recommended 1 year calibration cycle.


Non-contact AC voltage detection

Bar graph, measurement unit indication, and backlight

Sampling rate of about 3 times/sec

Automatic polarity indication

Autorange mode

Data Hold mode

Relative mode

MIN MAX mode

True-RMS measurement

Full-range overload protection

Low power consumption



AC Voltage 6V/60V/600V/750V
DC Voltage 6V/60V/600V/1000V
DC Current 60A/600A/1000A
AC Current 60A/600A/1000A
Resistance 600惟/6k惟/60k惟/600k惟/6M惟/60M惟
Frequency(with the clamp) 40.00Hz - 99.99Hz/100.0Hz - 999.9Hz
Frequency(with Test Leads) 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz
Duty Cycle 5% ~ 95%
Capacitance (use Relative mode) 40.00nF/400.0nF/4.000μF/40.00μF/400.0μF/4000μF
Diode Test The approximate forward voltage drop of the diode will be displayed.
Continuity Test The built-in buzzer will sound if the resistance is less than about 20Ω.
Temperature -20°C~0°C/0°C~400°C/400°C~1000°C, -4°F~32°F/32°F~752°F/752°F~1832°F