12V/24V Car Battery Tester

13302

The electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems.

Quantity

ltem No.

Inquiry Basket Consult

Description

1. Easy to confirm if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.
2. Test for continuity with its built-in auxiliary ground lead.
3. By pressing the power switch, the positive or negative current will be conducted to the probe tip for testing the function of an electrical component without the use of jumper wires.
4.Test for poor ground contacts instantly without performing voltage drop tests. it is also short-circuit protected, its internal circuit breaker will trip if it becomes overloaded.
5. Follow and locate short circuits without wasting fuses. It's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.

Features

1. Tiny deviation and more precise testing data
2. Can protect the circuit when power supply is reversed
3. Support input voltage range from 9V to 70V
4. Multi-languages available even the minority languages can be customized
5. The Large battery clip can carry more load
6. The 10m diagnostic cable is made of environmentally-friendly material, not pungent
7. Support 12V cars and 24V trucks
8. Overload self protection: reset automatically after overload, no need operation
9. The portable nylon bag is waterproof and oil proof
10. With personalized exquisite appearance
11. Low power consumption and high performance
12. Available with personalized customization and OEM orders.

Specification

Display	TFT color display (160 x 128 dpi)
Operating Temperature	0 to 60°C (32 to 140 F°)
Storage Temperature	-40 to 70°C (-40 to 185 F°)
External Power	12.0 or 24.0 V power provided via vehicle battery
Dimensions	Length 165 mm * Width 40 mm * Height 27 mm
DC voltage range	0-65V +1 digit
Resistance range	0-200 K ohm
Frequency response of tone pass through
0Hz to 10K hz.
Circuit Breaker
Rating current	1-10 Amp
Testing Standard
100% current	no trip
150% current	trip in one hour
200% current	trip in 3-30 seconds.
300% current	trip in 0.5-4.0 seconds.